产品介绍：
Features & Benefits
- Broad Wavelength Response 500 to 950 nm or 1100 to 1700 nm
- High-bandwidth DC up to 1.2 GHz
- High Gain 1 V/mW
- Low Noise <11 pW/√Hz
- Probe Connects to DPO7000*1and DPO/DSA/MSO70000*2Series
- SONET/SDH and Fibre Channel Reference Receiver Performance:
- TDS500C/700C (Opt. 3C or 4C)
- P6701B – Fibre Channel up to 1063 Mb/s
- P6703B – SONET/SDH up to 622 Mb/s
Applications
- Eye Pattern Testing of Optical Communication Signals(SONET/SDH and Fibre Channel)
The Tektronix P6700 Series optical-to-electrical (O/E) converters change optical signals into electrical signals for convenient analysis on Tektronix DPO7000 and DPO/DSA/MSO70000 Series oscilloscopes with appropriate adapters (see footnote 1 and 2), any other Tektronix oscilloscope e with a TekProbe interface, or when used with the 1103 TekProbe power supply. The P6700 Series O/E converters are ideal for optical source characterization in the development, manufacture, or service of optical communication systems and devices.
Small, conveniently packaged P6701B and P6703B optical-to-electrical analog converters provide an accurate interface for optical pulse shape measurements. The high gain, large dynamic range, and stable output offset of these O/E converters make them ideal for performing eye pattern analysis and extinction measurements.
The P6701B/P6703B optical input is a 1 meter, 62.5μ Multi Mode fiber with an FC/PC connector. Using the standard assortment of hybrid fiber-optic mating sleeves, these O/Es can accommodate the various industry connector standards.
The TekProbe interface provides power, auto-scaling, auto-termination, and correct units (microwatts) when used with Tektronix DPO7000 or DPO/DSA/MSO70000 and earlier TekProbe-e Series oscilloscopes.
Performance You Can Count On
Depend on Tektronix to provide you with performance you can count on. In addition to industry-leading service and support, this product comes backed by a one-year warranty as standard.
*1Requires the TPA-BNC adapter.
*2Requires the TCA-BNC adapter.
OC-3/STM-1 SONET/SDH Transmitter Eye Pattern Test.
P6701B: Typical Wavelength-dependent Gain (at 25 °C).
P6703B: Typical Wavelength-dependent Gain (at 25 °C).
The standard P6701B has a nominal frequency response which follows the fourth-order Bessel-Thompson for Fibre Channel 1063 Mb/s. The 1103 TekProbe power supply can be used to connect these products to the DSA8200 Series sampling oscilloscopes.
技术规格：
Characteristics
Wavelength Response | 500 to 950 nm | 1100 to 1650 nm |
Bandwidth*3(Typical) | DC to 1.0 GHz | DC to 1.2 GHz |
Rise Time (Typical) | ≤500 ps | ≤395 ps |
Conversion Gain | 1 V/mW | 1 V/mW |
Max Input Optical Power | 1 mW (0 dBm)*4 | 1 mW (0 dBm)*4 |
10 mW (10 dBm)*5 | 10 mW (10 dBm)*5 | |
20 mW (13 dBm)*6 | 20 mW (13 dBm)*6 | |
Max Output Modulation Depth for Reference Receiver Performance | ≤200 mVp-p | ≤200 mVp-p |
Noise E Power | ≤0.87 μW (RMS)*7 | ≤0.59 μW (RMS)*7 |
≤28 pW per √Hz | ≤19 pW per √Hz | |
Max Input Fiber Core Diameter | 62.5 μm | 62.5 μm |
*3Optical bandwidth (-6 dB electrical).
*4Maximum average operating power.
*5Max average nondestruct.
*6Max peak nondestruct.
*71 GHz low-pass filter in series with output.
Ordering Information
P6701B
Optical-to-electrical Converter with FC/PC Connector.
P6703B
Optical-to-electrical Converter with FC/PC Connector.
All Include: Hard Case, User Manual (English, French, German, and Japanese), Assorted Fiber-optic Hybrid Connectors (FC/FC, FC/ST, and FC/SC), Certificate of Traceable Calibration, One-year Warranty.
Service
Opt. C3 -Calibration Service 3 Years.
Opt. C5 -Calibration Service 5 Years.
Opt. D1 -Calibration Data Report.
Opt. D3 -Calibration Data Report 3 Years (with Opt. C3).
Opt. D5 -Calibration Data Report 5 Years (with Opt. C5).
Opt. R3 -Repair Service 3 Years.
Opt. R5 -Repair Service 5 Years.
Power Supply
1103 -TekProbe Power Supply. Please specify power plug when ordering.
Power Plug Options
Opt. A0 -US Plug, 115 V, 60 Hz.
Opt. A1 -Euro Plug, 220 V, 50 Hz.
Opt. A2 -UK Plug, 240 V, 50 Hz.
Opt. A3 -Australian Plug, 240 V, 50 Hz.
Opt. A5 -Swiss Plug, 220 V, 50 Hz.
Accessories
Single Mode Fiber-optic Cables -(9 μm).
FC/PC to FC/PC: Order xx.
FC/PC to ST: Order xx.
FC/PC to SC/PC: Order xx.
FC/PC to Diamond (2.5): Order xx.
FC/PC to Diamond (3.5): Order xx.
Multi Mode Fiber-optic Cables -(62.5 μm)
FC/PC to FC/PC: Order xx.
FC/PC to SC/PC: Order xx.
FC/PC to SMA: Order xx.
90/10, 3-port Single Mode Optical Splitter FC/PC Connectors -Order xx.
10 dB, Inline Single Mode Optical Attenuator FC/PC Connectors-Order xx.
DIN/FC Fiber-optic Hybrid Connector-Order xx.
图片展示：
拓展阅读：
;d=140
联系方式：